Filter
Top Products
Page 26
REPLACEMENT PARTS AND REMOVAL INSTRUCTIONS
(Continued)
Removing and Replacing the Firebricks
The firebricks inside your wood-burning appliance are used to store the radiating heat and
create a more thorough combustion inside the firebox. Occasionally one of them will crack
and require replacement. Before any bricks are removed, make sure the appliance is cool
and cleaned out. When replacing a specific firebrick, follow the directions below for removing
the firebricks. Once the broken firebrick is removed, it can be replaced and the firebricks that
have been removed can be replaced by following the previous directions in reverse order.
There is no need to remove all of the firebricks when replacing just one firebrick. The only
time all of the firebricks should be removed is when the appliance needs to be lightened or
when the firebox is being cleaned thoroughly.
REMOVING THE SIDE FIREBRICKS
1. Make sure the appliance is cool and cleaned out.
2. Remove the doors by opening each one 90 degrees and pulling it upwards. Make sure
to grasp the door by both ends. It is heavy and can be damaged.
3. Remove the side firebricks in the order listed below. The side firebricks are held in place
by metal clips that attach to the side of the firebox. Grasp the bricks, one at a time, from
the bottom and pivot them out from the bottom.
SIDE FIREBRICKS (TOP VIEW)
1
2
3
4
5
6
78 910
4. When replacing any of the side firebricks, use firebrick available from your dealer. The
dimensions of the side firebricks are 1 1/4" thick, 4 1/2" wide, and 9" long. The left side
firebrick located in front (Brick #1) has a hole drilled in it for gas line installation. If this
firebrick is damaged and needs to be replaced, make sure to specify this when ordering
a replacement firebrick.
REMOVING THE BOTTOM FIREBRICKS
1. Make sure the appliance is cool and cleaned out.
2. Remove the doors by opening each one 90 degrees and pulling it upwards. Make sure
to grasp the door by both ends. It is heavy and can be damaged easily.
3. Remove the side firebricks, following the directions listed above.