Elgato 2 Water System User Manual


 
EyeTV Software Manual
Chapter 2 · Viewer Window
8
(like 11-1 for regular programming, and 11-2 for weather). Look on your channel
list, and note these subchannels. You cannot watch content from two differ-
ent transponders at once (CBS and NBC), unless you had two separate tuners.
That would require two separate EyeTV units.
Looking for identical frequencies would be the way to determine if channels are
on the same multiplex. Look in the frequency column of the Channels section of
the Programs window, to see the frequency.
To open an additional live TV window, hold down the Control key while select-
ing Open Live TV Window from the File menu. You can open as many additional
windows as you like, but 2 or 3 are a practical upper limit on most machines.
All live TV windows can be paused, timeshifted, recorded, etc. independent of
each other. Since there is only one tuner, changing any window to a channel on
a different multiplex will change all other open windows to channels on the new
multiplex.
Using Digital Multifeeds
EyeTV software supports Multifeed. Multifeeds are sub-channels that can be
accessed from a portal channel. If your provider offers multifeeds and you have
a subscription and/or a smartcards that entitles you to receive these channels
you can use the onscreen remote to open the portal channel and then access
the multifeed sub-channel by choosing View > Multifeed.
Please note that providers tend to change the location of multifeed channels
which might require a fresh Auto Tune from time to time. Scheduling recordings
on these channels in not supported. Recordings need to be started manually.
This feature does not work with analog EyeTV products.
Changing the Size of the EyeTV
Viewer Window
You can change the size of the EyeTV Viewer window by grabbing the lower
right corner and dragging it diagonally.