Filter
Top Products
EARTHSTONE OVENS PRE-ASSEMBLED INSTALLATION INSTRUCTIONS---U.L. LISTED 2
PRE-ASSEMBLED INSTALLATION INSTRUCTION GUIDE
READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING AND USING THE APPLIANCE.
If this oven is not properly installed, a fire may result. To reduce the risk of fire, follow the installation
instructions. Please read this entire manual before you install the oven. Failure to follow instructions may
result in property damage, bodily injury, or even death.
The installer should contact the local building or fire officials concerning any installation restrictions and
the need for inspection(s) of the oven and venting applications before beginning installation.
Obtain the necessary permit to construct. In most areas this will include a permit to construct the oven
and a permit for the exhaust system. Sometimes an electrical permit is also necessary for connecting the
exhaust fan. All construction must comply with local building codes. There are some portions of these
instructions which are more restrictive than the building codes. Whichever is most restrictive must be
followed.
The diagram below indicates the minimum floor space required.
(ALL DIMENSIONS ARE TO OUTSIDE FACE OF STEEL ENCLOSURE)
OUTSIDE DIAMETER DIMENSIONS
MODEL 60 33” W X 32” D - MODEL 90 50" - MODEL 110 58"
MODEL 130 70" - MODEL 160 86"
IMPORTANT REMINDER
After reading this installation guide it is important to determine which venting application method will be
used.
Most cities accept the U.L. listed chimney installation (direct venting) however a few cities will require the
use of a Type I grease hood over the oven opening. Check with your local building department to
determine which is acceptable.
To maintain the U.L. listing of the oven the venting application needs to be installed in accordance with
the guidelines specified in this installation instruction guide.
SAVE THESE INSTRUCTIONS