Filter
Top Products
Eagle Instruction Manual Setup Mode • 33
7. To exit the Set Alarm Points menu, press the SHIFT/▼ button
until the prompt is next to Channel 4, then press the SHIFT/▼
button again. The ESCAPE message displays. (Press the AIR/▲
button if you want to return to the Set Alarm Points menu.
8. Press the POWER/ENTER button to save the settings and return
to the main menu.
Updating the Eagle’s Serial Number
Every Eagle is programmed with a unique serial number. The Data
Logging option includes the serial number in its log data for
identification purposes. The serial number setting accepts numeric (0
through 9) and alpha (A through Z) characters.
NOTE: The serial number is factory set and should not need to be
changed. However, if you “reset all defaults,” the serial
number is reset to ******.
1. From the main menu, select the SERIAL NO. menu option.
2. Press the AIR/▲ and SHIFT/▼ buttons to display the desired
character, then press the POWER/ENTER button to enter the
character. The next character flashes.
3. Repeat step 2 to enter the remaining characters. The main menu
displays after you enter the last character.
Updating the Lunch Break Setting
With Lunch Break OFF (default), the Eagle automatically starts new
TWA and PEAK reading collection at start up.
With Lunch Break ON, the RESUME screen displays during start up.
From this screen, you can choose to continue accumulating TWA and
PEAK readings from the last time the Eagle was used or start
collecting new readings.
1. From the main menu, select the LUNCH BREAK menu option.