Filter
Top Products
22 • Display Mode Eagle Instruction Manual
Clear Data Logger Screens
CAUTION:Once you clear the data logger, you cannot retrieve any data
previously stored in the data logger.
The Clear Data Logger screens allow you to clear the data logger
storage to accept new data. (Press the DISP/ADJ button to go to the
Remaining Log Time screen). You can set the Eagle to overwrite the
oldest data when the data log is full (see page 37).
To clear the data log:
1. With the above screen displayed, press the AIR/▲ button.
A confirmation message displays.
2. Press the AIR/▲ button to confirm that you want to clear the data
log.
The Eagle displays CLEARING DATA, then displays CLEARED
OK. The data log is cleared and the remaining log time value is
reset.
Remaining Log Time Screen
The Remaining Log Time screen displays the time remaining until the
Data Logger memory is full. The remaining time depends on how
often the Eagles stores data to the data log and how many channels
are active.
Press the DISP/ADJ button once more to return to the normal screen.