Filter
Top Products
Eagle Instruction Manual Setup Mode • 23
Setup Mode
NOTE: The screens illustrated in this section are examples only. The
screens displayed by your Eagle model may be slightly
different.
The Eagle has four operating modes: normal operating mode, display
mode, setup mode, and calibration mode. This section describes the
setup mode. In setup mode, you can:
• update the battery type setting
• update channel settings
• update the combustible gas channel’s units of measure
• update the alarm point settings
• update the Eagle’s serial number
• turn the lunch break function on or off
• update the alarm latching setting
• update the alarm silence setting
• turn the user ID function on or off
• update the auto calibration settings
• update the back light setting
• turn the auto fresh air function on or off
• update the data interval time setting (data logging option only)
• update the log data over write setting (data logging option only)
• update the time calibration setting (data logging option only)
• update the date and time settings (data logging option only)
• turn the zero follower on or off for each channel
• turn the confirmation beep on or off
• return to default settings (three default options)
The Eagle is pre-set to suit most applications. Follow these
instructions only if required.
Tips for Using Setup Mode
• To select a menu option, use the AIR/▲ or SHIFT/▼ button to
place the prompt next to the menu option, then press the POWER/
ENTER button to select the menu option.