Filter
Top Products
www.desatech.com
113195-01B
10
4. Using Phillips screwdriver, remove four
screws attaching top louver (see Figure 7).
5. Place top surround panel at top of fireplace
insert. Bottom edge of panel will slide under
top edge of insert. Align top panel screw holes
with those in insert. Install four #10 Phillips
screws, do not tighten. See Figure 8.
6. Align screw holes in side panels with holes
in top panel (see Figure 9). Insert and tighten
#10 Phillips screws.
7. Reinstall louver removed in step 4.
8. Carefully inspect fireplace surround assembly.
Make sure each part fits properly. Firmly
tighten all screws installed during assembly.
INSTALLATION
Continued
Figure 5 - Removing Screws and Screen
Shipping Screw
(DISCARD)
Screen Mounting Shoulder
Screw (4) (DO NOT DISCARD)
Shipping Screw
(DISCARD)
Figure 6 - Attaching Left Surround Side
Panel
Figure 7 - Removing Louver
Surround Side
Screen
Mounting
Shoulder
Screws
(5/16”)
Phillips
Screw
Top Louver
Phillips
Screws
Figure 8 - Attaching Top Surround Panel
Figure 9 - Attaching Side Panels to Top
Panel
Top Surround
Panel
Top Panel
Side
Panel
Phillips
Screws (4)
Top Edge of
Fireplace Insert
Phillips Screws
CAUTION: Do not overtight-
en. Metal can bend, warp or break
under excessive strain.
9. Install trim after final finishing and/or painting
of wall.