Filter
Top Products
Fig. 4
If you purchased the accessory leg kit (model 78-952) for use with the right
extension t able, Figure 4 illustrates the legs and loose items supplied with
this accessory.
1 - Legs (2)
2 - 5/8 long wood screws #8 (8)
3 - 1/4-20 x 1-1/2 long flat head Phillip s screws (4)
4 - 1/4 flat washers (4)
5 - 1/4-20 hex nuts (4)
ASSEMBLY INSTRUCTIONS
When retrofitting the T-Square
fi
Fence System to table saws that have been
equipped with original equipment fence, guide rails and extension wings, remove
the fence, front and rear guide rails and right hand extension wing from the saw.
If you purchased the saw and T-Square
fi
fence system as a promotional item,
assemble the saw as explained in the machine instruction manual and proceed to
assemble the T-Square
fi
fence to the saw as follows:
1. DISCONNECT THE SAW FROMTHEPOWERSOURCE.
3
4
5
2
1