Dell NSA 2600 Home Security System User Manual


 
Recording Configuration Information | 13
Recording Configuration Information
Use this section to record your configuration information. Be
sure to keep for future reference.
The default MGMT interface IP address is 192.168.1.254.
Registration Information
Networking Information
Administrator Information
Internet Service Provider (ISP) Information
Record the following information about your current Internet
service:
Serial Number: Record the serial number found on
the bottom panel of your
Dell SonicWALL appliance.
Authentication Code: Record the authentication code found
on the bottom panel of your
Dell SonicWALL appliance.
LAN IP Address:
_____._____._____._____
Select a static IP address for your
Dell SonicWALL appliance that is
within the range of your local network.
(default is 192.168.168.168)
Subnet Mask:
_____._____._____._____
Record the subnet mask for the local
network. Client devices connecting
through the appliance are assigned IP
addresses in this network.
(default is 192.168.168.0)
Ethernet WAN IP Address:
_____._____._____._____
Select a static IP address for your
Ethernet WAN. This setting only
applies if you are already using an
ISP that assigns a static IP address.
Admin Name: Select an administrator account name.
(default is admin)
Admin Password: Select an administrator password.
(default is password)
If you are
connecting with
DHCP
No information is usually required. However,
some providers may require a Host Name:
_________________________________
If you are
connecting with
Static IP
IP Address: _____._____._____._____
Subnet Mask:_____._____._____._____
Default Gateway: _____._____._____._____
Primary DNS: _____._____._____._____
DNS 2 (optional): _____._____._____._____
DNS 3 (optional): _____._____._____._____