Filter
Top Products
INSTALLATION AND OPERATION MANUAL
MF3500G, MF3500S, MF3500B Models
Page 24 800-345-6007
CumberlandStoveWorks.com
When the unit is cleaned out, empty the hopper, take
the venting apart and clean out the fly ash, rinse and let
dry. Inspect the draft blower and clean out all areas such
as back heat exchanger and lubricate the auger, auger
tube, and fire pot area. (Something like vegetable spray
works great to coat the inside of the unit and the moving
parts). Clean the glass, doors and outer cabinet so that
you are ready for the next heating season. Use of an ash
vacuum makes the clean out easier and faster.
TROUBLESHOOTING & REPAIR
At Ardisam, we build quality and durability into the design
of our products; but no amount of careful design by us, and
careful maintenance by you, can guarantee a repair-free
life for your stove. Most repairs will be minor, and easily
fixed by following the suggestions in the troubleshooting
guide in this section.
The guide will help you pinpoint the causes of common
problems and identify remedies.
For more complicated repairs, you may want to rely on
your retailer, an authorized service center or Ardisam, Inc.
A parts catalog is included in this section.
We will always be glad to answer any questions you have,
or help you find suitable assistance. To order parts or inquire
about warranty, call or write us at the address found below,
under the section ordering repair parts.
ORDERING REPAIR PARTS
Parts can be obtained from the store where the stove was
purchased or direct from the factory. To order from the fac-
tory- call, write or e-mail to:
Ardisam, Inc.
1690 Elm Street, Cumberland, Wisconsin 54829
1-800-345-6007 • 1-715-822-2415
E-mail: info@ardisam.com
Please include the following information with your order:
1. Part numbers
2. Part description
3. Quantity
4. Model number and serial number
Cleaning Tool
Actuate The Heat Exchanger
Cleaning Rod With Hole End of Tool
Clean Under Fire pot With Small Bend End of Tool