Craftsman 139.53425SRT Garage Door Opener User Manual


 
Youcanat_ch the headerbracketeitherto the
wail above the garage door, or to the ceiling.
Follow the tnstr_Jctions which will work _st for
your pa_leuJar requirements.
Fasten the Header Bracket to the Wall
o Center the bracket on the veAical guideline with
the bo_om edge of the bracket on the hodzonta[
tine as shown (with the arrow pointing toward the
* Mark either set of bracket holes (do not use _e
holes designated for ce#ing mount), Ddl{ _16" pilot
holes and fasten the bracket securely to a stm_u_
suppo_ with the hardware provided.
W_
Hardware Shown Actua_ S_ze
Fasten the Header Bracket to the Ceiling
, Extend the ve_icat guide{ine onto the ceiling as
shown,
- Center the bracket on the ve_ica_ maP_ no more
than 6" from the wall, Make sure the arrew is
pointing toward the wall The bracket can be
mounted flush against the ceiling when clearance
is minima_
Mark h@es designated for ceiling mount only Drill
3/16 _pilot holes and fasten bracket securely to a
stru_ura_ suppo_ with the hardware pro,tided
r_i_g M_r_Sng Ho_es
The n_ how is for _'6_n 9 ®_y,
Yo,J must _se_ag _r_s lo _T_un_
_h@header b_'_ck_{
14