Filter
Top Products
1
2
3
Contents
4
CPG #2561255 FIRELARM 2500 Operating Manual
Order of characters
← key key →
! " # $ % & ' ( ) * + , - . / 0 1 2 3 4 5 6 7 8 9 : ; < = > ? ~
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z [ \ ] ^ _ '
a b c d e f g h i j k l m n o p q r s t u v w x y z { l } ← → (space)
4-4
4.2.1 ZDACT configuration
The following programming options occur only when a ZDACT is mounted on
the FireLarm 2500. These options are skipped if no ZDACT is used.
SETUP ZDACT?
To configure ZDACT options
To exit configuration mode
To skip ZDACT configuration and go to zone configuration
To skip ZDACT configuration and go to AC trouble reporting delay
configuration
ENTER PHONE NUMBER 1?
To enter phone number 1.
To exit to SETUP ZDACT? screen
or To cycle forward or backward through ZDACT configuration
options.
PHONE NUMBER 1:
through To enter phone number digits.
To enter a comma for a 2 second pause in dialing sequence.
To advance the cursor.
To delete the character at the cursor.
To move the cursor back.
To save the zone description or cancel changes.
SAVE? (Y/N/BACK)
To save changes and advance to next phone number.
To keep previous setting and advance to next phone
number.
To return to the phone number.
ENTER PHONE NUMBER 2?
Similar to PHONE NUMBER 1
ENTER ACCOUNT NUMBER?
Similar to PHONE NUMBER 1. Up to four digits.