Filter
Top Products
Version 2.0b 46
APPENDIX C: TECHNICAL SPECIFICATIONS
Fuel Type: #2 Yellow Shelled Corn Fuel Wood Pellet Fuel
Moisture Content: 14% or less (12% preferred) A.P.F.I. residential fuel
Heat Content: 10,000 Btu/lb* Heat Content: 8200 BTU/lb
Ash Content: 3% maximum Ash Content: 1% max
Bulk Density: 40 lb./cubic ft. min
Moisture Content: 8% max
Size: 1/4” to 3/8” diameter
1.5” long max
Fines: 1% max through 1/8
th
screen
Hopper Size: 75 pounds corn or 55 pounds wood pellets
Flue Size: 3” or 4” – dependent on the chimney height
Flue Type: Type L or PL (double wall vent)
Type L or PL (single wall stainless steel liner)
Air Inlet: 1 1/2” Sch 40 Black Iron pipe
Auger Type: 1 1/8” cup Auger Feed System
Controls: Electronic Integrated Feed Rate/Blower Speed Controls
Electrical: 120 Volts, 3 Amperes, and 60 Hz
Measurements: UNIT BODY HEIGHT 22.75”
HEIGHT ON PEDESTAL 33.75”
HEIGHT ON LEGS 31.25”
UNIT WIDTH (REAR) 25.5”
WIDTH AT WIDEST POINT 30.75”
UNIT DEPTH 24.5”
Weight :
STOVE WEIGHT 400
Clearances:
UNIT TO SIDEWALL 2”
UNIT TO BACKWALL 1”
UNIT CORNER TO DIAGONAL WALL 1”
TOP TO COMBUSTIBLE 8”
TOP TO CEILING (Alcove) 8”
Shroud Measurements:
*BTU/lb can vary depending on the moisture content of the corn.