Cooper Bussmann 9752 Home Security System User Manual


 
496679 19
edly until the display shows the letter you want. You may already be familiar
with typing out short messages on a mobile phone using the same sort of
system. Figure 4 shows which letters are assigned to each key. Press C to
move the cursor to the next space for a new letter.
If you make a mistake press C or D to move the cursor over the letter you
want to change, and key in the new letter. If you want to delete a name
completely press D to move the cursor under the extreme left hand character
of the name. Press D again. The display clears the old name.
The system can store a maximum of 12 characters per name, including
spaces and punctuation marks.
When you have finished entering the user name press .
ABCÆÅÄ DEF
GHI
JKL MNOØÖ
PQRS
TUV WXYZ
Space'():.-!&
Figure 4. Letters Generated by Each Number Key
Using the Log
The system keeps a log of the last 250 events. You can examine this log
from the keypad. To use the log:
1. Key in your access code.
2. Press 5.
The display shows the most
recent event, for example:
The display shows a short message for each type of event. Table 1 on the
next page shows each of the messages that you might see, and their
meaning.
4. Special Functions