Conair UGD031 Thermostat User Manual


 
4
Operation
36
37
38
Setup Screens Test Mode Screens
Press Scroll Button and + key at the
same time for 10 sec to get in.
To get out at any time Press Scroll To get out at any time Press Scroll
button and - key at the same time button and - key at the same time
SEt uP 43 tE St
Press Scroll again to view next screen
Press Scroll again to view next screen
tyP Res
Controller Type
44 in.1 OFF
Digital Input 1 status
Press Scroll again to view next screen
Press Scroll again to view next screen
Prt ON
Process Protection Install
Press Scroll again to view next screen
47 in.4 ON
Digital Input 4 status
Press Scroll again to view next screen
50
ou.3
OFF
Press + key to jog output 3
Press Scroll again to view next screen
52 ou.5 OFF
Press + key to jog output 5
Press Scroll again to view next screen
53 ou.6 OFF
Press + key to jog output 6
Press Scroll again to view the first screen
* The test mode screens become
visable if tSt (screen 41) is turned on.
30
Setback Setup Screens
Press Scroll Button and + key at the
same time again for 2 sec to get in.
To get out at any time Press Scroll
button and - key at the same time
Set bAc
Press Scroll again to view next screen
39
Press Scroll again to view next screen
Stb OFF
Setback Install
41
42
tSt OFF
Goto Test Mode
Press Scroll again to view next screen
Ld.d OFF
Load Default
Press + Key to Load Default
Press Scroll again to view the first screen
31
ret 250
Press Scroll again to view next screen
32
20 ban
Press Scroll again to view next screen
33
10 sls
Press Scroll again to view next screen
34
Ldr 0
Press Scroll again to view next screen
35
2 P.dL
Press Scroll again to view next screen
35A
10 A.dL
Press Scroll again to view next screen
Add res
0 500
24 501
2 502
4 504
23 503
40
Id 1
Not applicable to the HTC
Press Scroll again to view next screen
45 in.2 OFF
Digital Input 1 status
Press Scroll again to view next screen
34A
Sbt OFF
Press Scroll again to view next screen
34B
SbL OFF
Press Scroll again to view next screen
Operation l 4-5