Filter
Top Products
CM2L40 Installation Instructions
20
Figure 31
CM2 Interface Board Hardware Information
(See Figure 31)
Dry Contact Closures
The unit provides dry contact outputs for system feedback, or to control other devices.
To complete circuits to external devices:
1. Connect the common wire from your switch to terminal 7. (See Figure 32)
2. Connect the 'up' wire from your switch to terminal 5.
3. Connect the 'down' wire from your switch to terminal 6.
Figure 32
1st Position of connector array
1st Position of connector array
1st Position of switch array
CM2 Connectors and Switches