Filter
Top Products
Safety Instructions
1
Power Burner
LTR50001100, Rev. A
www.calamebbq.com
Placement and Location
The Cal Flame Power Burner is designed for outdoor use only.
Never locate this appliance in an enclosed room, under a sealed •
overhead structure, or in any type of enclosed area such as a ga-
rage, shed, or breezeway. Keep clear of trees and shrubs.
Do not place the Power Burner under or near windows or vents •
that can be opened into your home.
The Power Burner is not intended for installation in or on recre-•
ational vehicles or boats.
Maintain sufcient distance as to not overheat any overhead com-•
bustible material such as a patio cover.
The area surrounding your new Power Burner should be kept clean •
and free from ammable liquids and other combustible materials
such as mops, rags or brooms, as well as solvents, cleaning uids,
and gasoline.
Do not store the liquid propane (LP) cylinder in the vicinity of this •
or any other appliance when it is not being used.
Set-Up
Before installing a built-in Power Burner in an enclosure, copy all •
product information such as model number, serial number and gas
type (LP) to page 34 of this manual. This information is located on
a plate located on the right side of the chassis.
We recommend that a licensed contractor install your Cal Flame •
Power Burner. Installation must conform to local codes, or in the
absence of local codes, with either the National Fuel Gas Code,
ANSI Z223.1 / NFPA54, Natural Gas and Propane Installation
Code, CSA B149.1, or Propane Storage and Handling Code,
B149.2), as applicable.
To prevent re and smoke damage, remove all packaging material •
before operating your Power Burner.
Before you start cooking, clean the Power Burner thoroughly with •
hot, soapy water. This is necessary to remove residual solvents, oil
and grease used in the manufacturing process.
Safety Instructions
WARNING: Improper installation, adjustment, alteration,
service or maintenance can cause injury or property damage. Read
the installation, operating and maintenance instructions thoroughly
before installing or servicing this equipment.