Filter
Top Products
16
Cleaning and Maintenance
Power Burner
LTR50001100, Rev. A
www.calamebbq.com
Cleaning and Maintenance
Removing and Replacing Burners
The burner has three pieces plus a wok ring. If you remove the burner
for cleaning, make sure to clean each piece and replace them in proper
order.
Removal
Disconnect or shut off the gas line connected to the Power Burner. 1.
Wait until the burners are cool.
Remove the grate and the wok ring.2.
Lift out the burner by raising the stud from the locking hole and 3.
pulling the burner out carefully to release it from the ignition and
gas supply valves.
Set the burner in a safe and dry place.4.
Wok Ring Burner Ring Burner Cap Burner Body
Adjustable Air Venturis