Filter
Top Products
Appendix
27
Power Burner
LTR50001100, Rev. A
www.calamebbq.com
Step 1: Switching the regulator
The regulator in the image below has
been removed to illustrate this pro-
cedure.
Remove the LP gas line.1.
Remove the cap tting from the 2.
end of the NG gas regulator.
Place the cap tting over the LP 3.
gas inlet.
Insert a male ared tting (4. not provided) in the NG gas regula-
tor.
You will need:
13 mm open end •
wrench
Male ared tting •
(not provided)
Pipe compound suitable •
for natural gas
NOTE: A ared
tting is NOT
included.
If you are attaching a
ex hose to the regu-
lator, you will need a
tting. The tting re-
quires a male are on
the input end with a
1/2” MPT on the output
end. The ared male in-
put end needs to be the
size of your ex tubing.
You can also connect
the regulator directly
to your NG gas service,
which will not require a
ared tting.