Filter
Top Products
90
MAINTENANCE
WARTUNG
ТЕХНИЧЕСКОЕ ОБСЛУЖИВАНИЕ
No
Page 10
Foot controller is not
used correctly.
MACHINE IS
NOISY OR SLOW
MACHINE DOES
NOT START
CONTACT YOUR LOCAL SERVICE CENTER
FABRIC DOES
NOT FEED
PROPERLY
No
Page 26
Stitch Length Dial is
set at no feeding.
("0")
No
Page 87
No
Page 7
Lint is clinging to the
bottom of the needle
plate.
Power supply plug is
removed from outlet.
No
Page 47
The combination of
needle size/thread
size/fabric is
incorrect.
No
Page 9
Main power switch
is turned off.
No
Page 11
Inferior needle is
used.
No
Page 33
The bobbin winder
shaft is slid to the
right.
No
Page 39
Thread is tangled.
No
Page 30
Feed Dog Position
Switch in down
position.
No
Page 63
(Model STAR 240E, STAR
230E, PS-57, PS-55, STAR-50,
RSR-55, XRX-55)
The buttonhole lever is
pushed toward the back
of the machine.
NEEDLE
BREAKS
No
Page 11
Needle is not
correctly inserted.
No
Page 11
Inferior needle is
used.
No
Page 47
The combination of
needle size/thread
size/fabric is
incorrect.
No
Fabric is pulled
excessively. Let the
feed dogs move the
fabric. Do not pull
the fabric.
Page 10
(Model STAR 240E,
STAR 230E)
Start/Stop button will not
work when foot controller
is plugged into machine.