Filter
Top Products
MAKING EMBROIDERY ADJUSTMENTS
Embroidery
175
5
Using the Automatic Thread
Cutting Function
(END COLOR TRIM)
The automatic thread cutting function will
cut the thread at the end of sewing each color.
This function is initially turned on. To turn this
function off, press key and then . This
function can be turned on or off during
embroidering.
* This setting returns to its default
when the machine is turned off.
a
Press .
The automatic thread cutting function (END COLOR TRIM) will cut the thread at the end of one color sewing. This function is initially turned on. To turn this function off, press (TENSION/CUT) key and then (END COLOR TRIM).
b
Press to turn off END COLOR TRIM.
→ The key will display as
* When one color thread is sewn, the machine will
stop without cutting the thread.
Using the Thread Trimming
Function (JUMP STITCH TRIM)
The thread trimming function will
automatically trim any excess thread jumps within
the color. This function is initially turned on. To
turn this function off, press key and then
. This function can be turned on or off
during embroidering.
* Your customized setting remains after turning off
and on the machine.
a Jump stitch
a
Press .
Note
• When this function is turned on, use the
enclosed ball point needle 75/107 for
embroidering patterns with short jump
stitches such as alphabet characters. Using
other needles may cause the thread to
break.
a
a