Filter
Top Products
NAMES OF MACHINE PARTS AND THEIR FUNCTIONS
6
No. Part Name
Part Code
U.S.A./
Canada
Others
1 Buttonhole foot “A” X57789-251
2 Embroidery foot “W” XC8156-651
3 Overcasting foot “G” XC3098-051
4 Monogramming foot “N” X53840-351
5 Zipper foot “I” X59370-051
6 Zigzag foot “J” (on machine) XC3021-051
7 Blind stitch foot “R” X56409-051
8 Button fitting foot “M” 130489-001
9 Walking foot SA140 F033N:X81125-001
10 Side cutter foot SA177 F054:XC3198-101
11 Free-motion quilting foot “C” XE0765-101
12 Free-motion open toe quilting
foot “O”
XE0767-001
13 Free-motion echo quilting foot
“E”
XE0766-001
14 Straight stitch foot SA167 F042N:XC1973-102
15 Seam ripper X54243-151
16 Bobbin × 10 (One is on
machine)
SA156 SFB
17 Needle set X58358-051
18 Twin needle X59296-151
19 Ball point needle set XD0705-051
20 Scissors XC1807-121
21 Chalk pen XE8568-001
22 Cleaning brush X59476-051
23 Eyelet punch 135793-001
24 Screwdriver (large) XC8349-021
25 Screwdriver (small) X55468-021
26 Spool cap (small) 130013-154
27 Spool cap (medium) × 2 X55260-153
28 Spool cap (large) 130012-054
29 Vertical spool pin XC8619-051
30 Spool felt X57045-051
31 Disc-shaped screwdriver XC1074-051
32 Spool net XA5523-050
33 Embroidery frame set (small)
H 2 cm × W 6 cm
(H 1 inch × W 2-1/2 inches)
SA437 EF73:XC8479-052
34 Embroidery frame set
(medium) H 10 cm × W 10 cm
(H 4 inches × W 4 inches)
SA438 FE74:XC8480-052
35 Embroidery frame set (large)
H 18 cm × W 13 cm
(H 7 inches × W 5 inches)
SA439 EF75:XC8481-052
36 Embroidery frame set (extra
large) H 30 cm × W 18 cm
(H 12 inches × W 7 inches)
SA440 EF76:XC8482-052
37 Foot controller XD0500-151 (EU area)
XC8028-051 (other area)
38 Embroidery needle plate
cover
XD1644-051
39 Grid sheet set SA507 GS3:X81277-150
40 Touch pen (stylus) XA9940-051
41 Knee lifter XA6941-052
42 USB cable XD0745-051
43 Bobbin case (no marking) XC8167-551
44 Straight stitch needle plate XC8362-251
45 Cord guide bobbin cover (with
single hole)
XE8991-001
46 Embroidery bobbin thread SA-EBT EBT-CEN:
X81164-001
47 Stabilizer material SA519 BM3:X81175-101
48 Operation manual XF3896-001
49 Quick reference guide XE2538-201
50 Embroidery unit carrying
case
SA529 D6EUC:
XC9862-052
51 Hard case XC7750-051
52 Bobbin cover (with mark) XF0750-001
53
Bobbin case (gray)
XE8298-001
Memo
(For U.S.A. only)
Foot controller: Model S
This foot controller can be used with this
machine model NV4750D.
Memo
• Always use accessories recommended for
this machine.
• The screw of the presser foot holder is avail-
able through your authorized dealer (Part
code XA4813-051).
• Included accessories 37, 48 and 49 can be
stored in the machine’s hard case.
No. Part Name
Part Code
U.S.A./
Canada
Others