Filter
Top Products
RPX ASSEMBLY INSTRUCTIONS
Place Bleed Sticker on
Corner Pillar over hole
Pass bleed tap valve
through hole opening
and fit rubber Grommet
over valve body.
Cable tie bleed
hoses to gether.
Fit Blank Grommet
to other three holes.
Installation of Bleed Valve.
GROMMET
BLANK
P/No 626932
GROMMET
BLEED VALVE
P/No 999236
40
Note: Apply some White
Petroleum Jelly, or other
similar lubricant to
Grommet for ease
of installation.