Filter
Top Products
RPX ASSEMBLY INSTRUCTIONS
16
Feed seven wires from the electrcal control box wiring
loom through the motor terminal cover opening.
Attach all wires and secure motor terminal cover.
Wire connection.
For low speed connect.
Wire, tag numbered 1 to U1
2to V1
3toW1
For high speed connect.
Wire, tag numbered 4 to W2
5toU2
6toV2
Connect earth wire to motor casing earth point.
Motor terminal cover.
Wiring loom to
electrical control box.
Gland
Cable tie wire loom
to Motor Platform.
Prepare Motor and Controls. Step 3 of 4.