Filter
Top Products
RPX ASSEMBLY INSTRUCTIONS
18
Fit 460 mm Aluminium
Pulley to the fan shaft.
Use suitable straight
edge, align Fan Pulley
to Motor Pulley.
Align Fan Pulley and
Motor Pulley.
Tighten All screws.
Allow shaft to extend
approx 15mm passed
pulley.
Apply small amount
Loctite 222 (not supplied)
to Grub screws.
Total 3 Grub screws.
Lock Screws on Motor
Pulley Taper Bush.
Fan Pulley Attachment.
GRUB SCREW
5/16 BSW 19 mm Long
P/No SCR433