Filter
Top Products
RPX ASSEMBLY INSTRUCTIONS
17
The motor pulley attaches
to the motor shaft via a
Taper Lock Bush screwed
to the Pulley.
Do not fully tighten Bush
locking screws now, Pulley
may need to move on shaft
to align V-Belts.
Motor Pulley Attachment
Prepare Motor and Controls. Step 4 of 4.
Secure Motor Platform to
Base Channels.
At this stage do not fully
tighten. Refer to notes
Belt Tension, P19.
Note:
Fully tighten all Bolts securing
Base Channel to Base frame.
Repeat same for
opposite side.
Use crane to install
Motor Platform to
Base Channels.
Base Channel.
BOLT WASHER
M8x30 8x25mm
P/N0 628257 P/No 627984