Filter
Top Products
RPX ASSEMBLY INSTRUCTIONS
12
Secure Flashing
Angle to Fan Housing
and Tank, with supplied
screws: Total 10 places.
Note: If end of fan housing
bows inwards and cannot
be easily fixed, a special
clamp can be utilised to
aid fixing. P49 has details
to enable manufacture
of clamp.
Apply additional silicone
to top and bottom
edge of Flashing Angle.
Check that silicone
has a good seal to
Fan Housing and Tank.
Smooth out silicone to
give neat appearance.
Repeat Steps1&2foropposite side.
Sealing Fan Housing to Tank. Step 2 of 2.
SCREW - Phlp.
4x25 mm
P/No SCR506