Filter
Top Products
RPX ASSEMBLY INSTRUCTIONS
36
Repeat same for other side.
Drill two 12.5mm holes
through Top Channel
and Cab Top.
Drill one 6mm hole
to centre Top Channel.
Note: Use 12.5 and
6 mm holes on Top
Channel as guide.
Top Channel.
Place plastic Washers
between Cabinet Top
and Top Channel.
Place one Washers
at each end.
Note: Number of washers may vary, between coolers.
Two washers to centre.
Top Channel.
Dome effect to Cab Top, for water run off.
Cabinet Top Final Assembly. Step 1 of 3.
PLASTIC
FLAT WASHER
6.5X50X5MM
P/No WAS121
PLASTIC
FLAT WASHER
13X50X5MM
P/No 608303