Filter
Top Products
CC408 | Operators Guide | 4. Codepad Indicators EN | 6
Bosch Security Systems | 5/04 | 920050O.OG.112
4. Codepad Indicators
Figure 1: CP5 Eight Zone LED Codepad
Figure 2: CP5 Eight Zone LCD Codepad
The codepad is the communications interface
between you and your alarm system. Use the
codepad to issue commands. The codepad offers
both visual and audible indications that guide you
through the general operation.
The codepad incorporates numerous indicators.
There are zone indicators that show the condition of
each zone and four other indicators for general
status. The following pages outline a list of situations
and the relevant indicators that are seen.
4.1 Zone Indicators
1 2 3 ….
The zone indicators (1 to 8) display
the status of the zones. Table 2 lists the
various situations that the indicators
display (such as, Zone Sealed/Zone
Unsealed).
Table 2: Zone Indicator
Zone Indicator Definition
On Zone is unsealed.
Off Zone is sealed.
Flashing Fast
(0.25 seconds on/
0.25 seconds off)
Zone is in alarm condition.
Flashing Slow
(1 second on/
1 second off)
Zone is manually isolated or
selected to be isolated.
4.2 AWAY Indicator
The AWAY indicator displays the
system is armed in AWAY Mode. The
AWAY indicator also flashes in unison
with the STAY indicator when
programming various options
throughout the Operators Guide.
See Section 5.1 Arming in AWAY Mode
for information on the different
methods of arming the system in
AWAY Mode.
Table 3: AWAY Indicator
AWAY
Indicator
Definition
On System is armed in AWAY Mode.
Off System is not armed in AWAY Mode.
4.3 STAY Indicator
The STAY indicator displays the system
is armed in STAY Mode 1 or STAY
Mode 2. The STAY indicator also flashes
in unison with the AWAY indicator
when programming various options
throughout the Operators Guide.
See Section 5.2 Arming in STAY Mode 1 for
different methods of arming in STAY
Mode 1. See Section 5.3 Arming in STAY
Mode 2 to arm in STAY Mode 2.
Table 4: STAY Indicator
STAY
Indicator
Definition
On System is armed in STAY Mode 1 or
STAY Mode 2.
Off System is not armed in STAY Mode 1
or STAY Mode 2.
Flashing twice
a second
Zone Isolating Mode or setting STAY
Mode 2 zones.
Flashing once
every 3
seconds
Day alarm status – day alarm turned
on.
4.4 System Disarmed
This indicator displays with the
indicator when the system is disarmed.