Filter
Top Products
CC408 | Operators Guide | 24. Glossary of Terms EN | 21
Bosch Security Systems | 5/04 | 920050O.OG.112
Table 15: continued
Term Description
Silent Alarm Your installer may program zones for silent operation. When the zone programmed
for silent operation is violated during the armed period, your alarm system
communicates with the monitoring station without sounding the sirens.
STAY Mode 1 A condition that automatically isolates zones when your system is armed in STAY
Mode 1. Only your installer can program zones to be isolated automatically in STAY
Mode 1.
STAY Mode 2 A condition that automatically isolates zones when your system is armed in STAY
Mode 2. Only the Master Code holder can program zones to be isolated
automatically in STAY Mode 2.
Telco Arm Sequence Telco arming is a feature that automatically calls the telephone exchange and diverts
your telephone number to another telephone when the system is armed in AWAY
Mode. (In Australia, this feature is called “Call Forward”.)
Telco Disarm
Sequence
Telco disarming automatically calls the telephone exchange and does not forward
your telephone number.
Unsealed Refers to zone status. A zone is unsealed when a zone is violated. The
corresponding zone indicator displays on the codepad.
User Code The personal identification number that the operator uses to arm and disarm the
system.
Zones A monitored input used to trigger an alarm condition when violated.