Filter
Top Products
CC408 | Operators Guide | 13. Telco Arm/Disarm Sequence (Call Forward On/Off) EN | 13
Bosch Security Systems | 5/04 | 920050O.OG.112
13. Telco Arm/Disarm
Sequence (Call Forward
On/Off)
Use this feature to program the Telco Arm Sequence
and Telco Disarm Sequence (Call Forward On/Off).
13.1 Telco Arm Sequence
Use this to program the Call Forward – Immediate
On sequence or Call Forward – No Answer sequence
to automatically operate when you arm the system in
AWAY Mode. This feature is only available if your
telecommunications provider has the call-forward
option.
The examples given in this feature are
only applicable to Australia.
Call Forward – Immediate On
You can redirect calls to anywhere in Australia,
including mobile phones, pagers, and answering
services. When Call Forward is turned on, your
telephone does not ring.
Call Forward – No Answer
When your telephone is not answered within 20
seconds, this feature redirects all incoming calls to
another number anywhere in Australia, but you can
still make outgoing calls.
Table 11: Telco Arm/Disarm Dialling Digits
Digit
Required
Number to
Program
Digit
Required
Number to
Program
0 0 8 8
1 1 9 9
2 2
3 3 * *1
4 4 # *2
5 5 4-sec pause *3
6 6 break *4
7 7
How to Program the Telco Arm Sequence
1. Enter your four-character Master Code, followed
by the [3] and [#] keys (for example,
[2 5 8 0 3 #]).
Three beeps sound and the STAY and AWAY
indicators flash.
2. Press button [1] and [#] keys to select the Telco
Arm Sequence.
Three beeps sound.
3. Enter the call forward sequence (for example,
[* 6 1][Phone Number][#] to program the Call
Forward - No Answer sequence, or [* 2 1][Phone
Number][#] to program the Call Forward
Immediate sequence).
To program a “*” in the Telco Arm Sequence,
enter [* 1]. To program a “#” in the Telco Arm
Sequence, enter [* 2].
4. Press the [#] key when finished.
Two beeps sound, and the STAY and AWAY
indicators go dark.
To disable the Telco Arm Sequence,
enter the call forward sequence as [* 4]
(break) for Step 3.
13.2 Telco Disarm Sequence
This feature automatically disables the call forward
sequence when disarming the system.
How to Program the Telco Disarm Sequence
1. Enter your four-character Master Code followed
by the [3] and [#] keys (for example,
[2 5 8 0 3 #]).
Three beeps sound and the STAY and AWAY
indicators flash.
2. Press the [2] and [#] key to select the Telco
Disarm Sequence. Three beeps sound.
3. Enter the call forward disable sequence (for
example, [# 6 1 #] to disable the No Answer
Call Forward sequence, or [# 2 1 #] to disable
the Call Forward Immediate sequence).
To program a “#” in the Telco Disarm
Sequence, enter [* 2].
4. Press the [#] key when finished.
Two beeps sound, and the STAY and AWAY
indicators go dark.
To disable the Telco Disarm Sequence,
enter the call forward sequence as [* 4]
(break) for Step 3.