Filter
Top Products
Encore VPx Installation Guide • 08-0311105-00 Rev 00 27
båÅçêÉ=smñ=fåëí~ää~íáçå=dìáÇÉ
Installation
b. On the second stack, set the ID of the bottom stack Processor to 3 (VP
or VPx). Set the ID of the top stack Processor to 4 (VP or VPx).
13. Power On — Refer to Chapter 6 of the Encore Presentation System User’s
Guide for all power on instructions.
Important
In each stack, the ID of the bottom stack Processor must
always be lower than the ID of the top stack Processor.
Remember that master units (ID#1 and ID#2) must be VP
only, not VPx.