Filter
Top Products
10 Encore VPx Installation Guide • 08-0311105-00 Rev 00
båÅçêÉ=smñ=fåëí~ää~íáçå=dìáÇÉ
VPx Hardware
3) Program 2 Out Analog
One 15-pin D connector is provided for the Analog Program 2 Output. This
output is identical to the analog Program 1 Output, except that it does not include
edge feathering and data doubling components.
4) Program 2 Out DVI
One DVI connector is provided for the Digital Program 2 Output. This output is
identical to the digital Program 1 Output, except that it does not include edge
feathering and data doubling components.
5) Program 1 Out DVI
One DVI connector is provided for the Digital Program 1 Output. This output
includes all edge feathering and data doubling components, and is designed for a
digital connection to your projector.
6) Program 1 Out Analog
One 15-pin D connector is provided for the Analog Program 1 Output. This
output includes all edge feathering and data doubling components, and is
designed for an analog connection to your projector.
7) Program Out HD/SDI
One BNC connector is provided for the HD/SDI (High Definition/Serial Digital
Interface) output. Refer to the “Program Output Notes” section on page 14 for
additional information on video outputs.
8) Program Link Out
One DVI connector is provided for the Program Link Output. To ensure proper
data doubling in wide screen configurations, this output connects to the Program
Link Input on another VPx.
9) Program Link In
One DVI connector is provided for the Program Link Input. To ensure proper
data doubling in wide screen configurations, this input connects to the Program
Link Output from another VP (or VPx).
10) Ethernet Port
One RJ-45 connector is provided for 10/100BaseT Ethernet communications.
For multiple connections, use an Ethernet switch on an isolated network.
Six analog and digital connectors are provided for each M/E. Please note:
~ All M/E boards are identical on a VPx. See the “VPx M/E Connectors”
section on page 12 for details.
~ Refer to the “M/E Connector Priority” section on page 13 for important
information on connector priority.
Note
In Chapter 3 “Installation” of the Encore Presentation
System User’s Guide, refer to the “Program and Source
Link Connections” section for details on the link connectors
in wide screen configurations.
11) M/E 1 Connectors 12) M/E 2 Connectors 13) M/E 3 Connectors