Filter
Top Products
6 Features & Specifications
© Travis Industries 93508061 4050526
Installation Options
• Freestanding
• Freestanding in an Alcove
• Freestanding in a Mobile Home
• Masonry Fireplace Insert
NOTE: This fireplace insert is not approved for
Factory Built Z.C. (Metal) Fireplaces
Features
• EPA Phase II Approved
• 3.1 Cubic Foot Firebox Volume
• Single Operating Control
• Accepts Logs Up to 24" Long
• Steel Plate Construction (1/4" & 3/16")
• Heavy Duty Refractory Firebrick
• Optional High-Tech Blower
Heating Specifications
Approximate Maximum Heating Capacity (in square feet)* 1,500 to 2,500
Maximum BTU's per Hour (Cord Wood Calculation) 74,300
Overall Efficiency (Oregon Method) 70.0 %
Maximum Burn Time Up to 12 Hours
* Heating capacity will vary depending on the home's floor plan, degree of insulation, and the outside
temperature. It is also affected by the quality and moisture level of the fuel.
Dimensions
Note:
Measure side, corner,
and back clearances
from the stove top.
29-3/8"
21 1/4"*
The flue collar
protrudes 1" above
the stove top
* For inserts, add 1" for the flue collar.
** See "Fireplace Requirements" for details
on fireplace insert installation.
5-3/4"
Height:
With Legs 29-1/8"
Pedestal 32-5/8"
20-1/2"**
Weight:
510 Lbs. with pedestal
Figure 1
Emissions
2.6 Grams Per Hour (EPA Phase II Approved) – Tests conducted by E.E.S.P.C.