Maintaining Your Appliance 35
© Travis Industries 93508061 4050526
Door Parts
5/16" Nutdriver
Glass Clip Screw
Door Gasket -
Adhere with gasket cement.
Door
Frame
Glass
Glass Clip
Make sure
there is a
gap around
the edge of
the glass
Glass Gasket
Glass Clip
Gasket
9/16" Wrench
6
3
4
1
2
11
10
12
8
9
Cross Section
7
5
ID # DESCRIPTION QTY PART # ID # DESCRIPTION QTY PART #
1DOOR SHELL - BLACK
Door Shell - Brass
1 99300505
99300502
2GLASS GASKET - 3/8" 1 99900403
3GLASS 1 99400302 4GLASS CLIP WITH GASKET 4 91001250
5GLASS CLIP SCREWS (10) 4 91001249 6DOOR GASKET CEMENT 1 99900409
7DOOR GASKET - 7/8" X 120" 1 99900406 8-12 DOOR HANDLE ASBLY. 1 99900415
9DOOR HANDLE, WOOD 1 99300600 11 DOOR CAM, BRASS 1 99900416
Replacing the Glass
The glass must not contact the door shell or glass clips directly. The glass gasket and glass clip
gaskets insulate the glass to prevent cracking. Do not over-tighten the glass clips.
Remove the door and place it on a suitable work surface. Remove the door gasket. Remove the glass
clips (the glass clip gaskets adhere to the glass clips). Remove the glass. Place the glass gasket in the
inner channel of the door shell then place the glass on top of the gasket. Replace the clips to secure.
Replacing the Door Gasket
The door gasket inserts into the outer groove of the door shell. Stove gasket cement holds it in place.
Before installing, remove any residual cement. Lay the gasket in place (start at the lower left corner) and
cut off any excess gasket (do not stretch the gasket. The cement fully cures with heat from the stove.
You may need to open and close the door repeatedly to get the gasket to seat fully.
Replacing the Door Handle
See the illustration above for a component list (see pg. 33 for details on adjusting the door).