Filter
Top Products
18 Fireplace Insert Installation (for qualified installers only)
© Travis Industries 93508061 4050526
Top Air Chamber Extension
The top air chamber extension is shipped separately with the heater and may be installed when the heater is
used as an insert (see “Standard Model” under Insert Placement and Fireplace Requirements). Follow the
directions below to install.
1. Remove the grill. Remove and discard the bypass extension rod (keep the pull ring).
Phillips
Screwdriver
Remove the grill.
Remove and discard the bypass extension rod
attached to the stove (keep the pull ring).
2. Install the top air chamber extension following the directions below.
Attach the top air chamber
extension using the screws
included in the owner's pack.
Phillips
Screwdriver
3. Attach the grill to the air chamber top. Attach the bypass extension rod included in the owner’s kit to the
damper yoke. Attach the bypass pull ring to the extension rod to complete the installation.