Filter
Top Products
22 Finalizing the Installation
© Travis Industries 4060111 100-01175
Glass Frame Removal and Installation (continued)
The spring pin can come loose from the latch assembly. This occurs when it is turned 1/4 turn
when it is disengaged. Follow the directions below to re-install the spring pin if it becomes loose.
To re-install the spring pin, first
insert this end into a 1/4” key.
Insert the spring pin into
this bracket with the pins
aligned horizontally.
Push in slightly and
twist 1/4 turn.
With this pin vertical, the spring
pin will remain in place.
NOTE: The spring pins
can be installed with the
glass frame in place or
removed.