Filter
Top Products
Installation (for qualified installers only) 11
© Travis Industries 4060111 100-01175
Face Sizing
Face Height Width Notes
Rawhide 22-1/2” 32”
Victorian 22-1/2” 32”
Rosario 21-9/16” 32”
Cambridge 21-1/2” 33”
Craftsman 21-1/2” 32”
Classic Arched, Artisan 22” 30” Side begins arch 3-1/2” below top - 34” radius
Metropolitan 22” 30”
Architectural Series 22-3/4” 29-7/8”
Discovery 21-9/16” 32”
Bedford 22-3/4” 34-1/8” Requires the Bedford DVS EF II Face Upgrade Kit.
This lowers the face 1-1/4” - see “Mounting the
Bedford Face” on the following page.
2-1/4” Deep, requires 5/8” above for installation
Modifying the Face Connector for Rosario, Discovery, and Artisan Faces
The Rosario and Discovery face attach with screws that insert near the glass frame. To better
access these screws, we recommend you re-position the face connector following the directions
below. NOTE: The connector can be left in the stock position, but this makes face installation
difficult.
Face Connector
Bracket
Remove the face connector bracket
from the heater (on both sides).
Re-attach the face connector to the
heater using the forward mounting holes.