Filter
Top Products
28 Maintenance
Travis Industries 4050225 100-01154
Bi-Weekly Maintenance (or every 10 bags of pellets)
Clean the Heat Exchange Tubes
Heat Exchanger
Cleaning Rod
Keep the door closed so the
flyash does not enter the room.
WARNING:
The front edge of the
hopper lid becomes very
hot, do not touch the area
below the handle.
Open the hopper lid.
Store the scraper
rod tool by hanging
it on the hanger on
the back of the
stove.
With the door closed, insert the included
tool into the hole on the heat exchanger
cleaning rod. Move the heat exchange
cleaner up and down several times.
Vacuum Hopper
Run the stove until the pellets run out. Open the hopper and vacuum out the entire hopper. The
dust and any other debris near the bottom should be removed to prevent excessive build-up.
Cleaning the Optional Gold Surfaces (Door and optional Grill)
Fingerprints or other marks left on gold surfaces may become etched in place if they are not wiped
clean prior to turning the stove on. Clean the gold with denatured alcohol and a soft cloth (make sure
the heater is cool). Other cleaners may leave a film that may become etched into the gold.