Filter
Top Products
EConnect™ TA7210
21
If you have more than one EIM linked to the thermostat, the displayed value is between the
thermostat and the first-linked EIM. The signal strength ranges from 0 (no signal) to 10
(strongest).
Thermostat
To replace the thermostat, install batteries in the new thermostat (see page 7) and link it to the wireless
network (see page 8). To customize the thermostat, see pages 11-18.
Verifying the signal strength between the EIM and the thermostat
9.
# Display Button Step
1)
From the home screen,
press and hold the right
center button for 5 secs.
2)
Press to select
Connexion (link) and
press Ok.
3)
Press to select Signal
and press Ok.
4)
The signal strength is
displayed. Press Sortir
(exit) twice to return to
installer’s setup menu or
three times to return to
home screen.
Replacing wireless devices
10.
If more than one EIM were linked to the old thermostat, you can link the new thermostat from
any one of these EIMs.
69-2472EF-01 (Aube TA7210 System Installation Guide).book Page 21 Wednesday, June 29, 2011 1:15 PM