Filter
Top Products
EConnect™ TA7210
11
1) Press the EIM Connect button. Its green flashing light will change to a steady green
light.
2) Put the cover back on the antenna module.
Accessing the installer setup menu
• To access the installer setup menu from the home
screen, press and hold the right center button for 5
secs.
Navigating the menus
• Press or to navigate the menus and setup
functions.
• Press Ok to select the flashing menu or setup function.
Modifying the settings
• Press or to modify the displayed setting.
• Press Ok to save the displayed setting. The setting will
flash to confirm that it has been saved.
Exiting the menus
• Press Sortir (exit) once to return to the previous menu
or as many times as necessary to return to the home
screen.
Exit wireless setup
5.
If you do not press the Connect button, the EIM will automatically exit wireless setup
after 15 minutes of inactivity.
Customize the thermostat
6.
If you press Sortir (exit) after you have changed
a setting, the new setting will not be saved.
Make sure you press Ok to save the new setting
before you press Sortir (exit).
69-2472EF-01 (Aube TA7210 System Installation Guide).book Page 11 Wednesday, June 29, 2011 1:15 PM