Filter
Top Products
Installation Guide
20
Mounting the outdoor sensor (optional)
Mount the sensor vertically on an
exterior wall, at least 6 inches below
any overhang. Choose a location
protected from direct sunlight.
Place sensor securely in bracket,
facing away from wall.
Error codes
8.
Display Description
LO The indoor temperature is below 0°C (32°F).
HI The indoor temperature is above 60°C (140°F).
- - The temperature reading is currently unavailable or the sensor is defective.
E128 The wireless network setup must be redone.
E129 Attempting to connect incompatible wireless devices.
E130 Invalid address. Call customer assistance.
E134 Low signal strength. Move wireless device to a different location and try again.
E137 Maximum number of devices is exceeded.
E138 Make sure Connected light on EIM is flashing and you are 2+ feet away from EIM.
E152 Incorrect order. Make sure to link EIM to proper thermostat.
69-2472EF-01 (Aube TA7210 System Installation Guide).book Page 20 Wednesday, June 29, 2011 1:15 PM