Filter
Top Products
Installation Guide
14
Programmable mode
The thermostat is factory-set as a 7-day programmable thermostat. To set it as a non-programmable
thermostat, proceed as follows:
Copy
Use this function to copy the configuration settings, the schedule settings or both to other EConnect™
wireless thermostats in your house. This function is available only if the thermostat is connected either to a
remote control or outdoor sensor. The settings are copied to other thermostats connected to the remote
control or outdoor sensor.
# Display Button Step
1)
From the installer’s setup
menu, press to select
Horaire (schedule) and
press Ok.
2)
Press or to select
Non and press Ok.
# Display Button Step
1)
From the installer’s setup
menu, press as needed
to select Copie and press
Ok.
2)
Press or to select
Horaire (schedule),
Configuration or both.
Press Ok.
3)
Patientez (wait) may
appear for several
minutes. When SUCC
(success) appears, press
Sortir (exit) to return to
home menu.
69-2472EF-01 (Aube TA7210 System Installation Guide).book Page 14 Wednesday, June 29, 2011 1:15 PM