Filter
Top Products
8
ChannelMag
Section 1 Introduction
Before installation, make sure the operating environments of the flowmeter and ancillary equipment
are consistent with appropriate national approvals such as USA UL or NEC, Canadian CSA,
European CE.
The installation must be carried out by qualified personnel only. Read the entire manuals before
attempting to install or operate the equipment, including for ancilliary equipment.
The flowmeter electronics require normal AC power supply. The flowmeter and ancillary
equipment produces no electro-magnetic fields that are harmful to the environment or to personnel.
They are certified as such to meet European CE requirements.
1.3 Safety
DANGER
Crush hazard. The flowmeters may be very heavy (net weights from 45 to 450 lb / 20 to 200 kg
each). You could be crushed to death, or very seriously injured, if the flowmeter slips during
installation and strikes you or falls on you. Handle with care when installing and be sure that
hoisting apparatus can safely lift the total weight of the flowmeter (see Section 5.1).
Use the lifting brackets provided on the sensor (see drawing in Sections 2.2 and 2.4).
The following warnings are provided for your safety. You should read the general note regarding
danger preceding this introduction, as well as these warnings when working with this equipment:
WARNING