Filter
Top Products
22
ChannelMag
Section 2 Installation
For multiple ChannelMag systems, the electrode and reference cables may all run in the same
conduit to their respective transmitters, but separated from the exciter coil cables by a minimum of
2 feet (0.5m). Multi-exciter coil cables may all run together in a single conduit, even with other
power cables. Again, the multi-exciter coil cables must be separated from the reference and
electrode cables by a minimum of 2 feet (0.5m).
The calibration data is provided on the NIST traceable Calibration Certificate, as well as on a label
inside the 4411e transmitter. Details of adjustments in a fl ow range are provided in the 4411e
instruction manual.
3.1 Calibration and
Range Factors