Filter
Top Products
9 - 26
Figure 27
Serial numbers below 10,000:
Refer to Figure 28 and Figure 30 for Steering.
The steering controls will swing outward when in
neutral. In the outward position, each handlebar will
contact a switch. The switches must be engaged to
start the engine.
When the handlebars are moved inward and forward
the link will shift the transmissions forward.
The steering mechanism can be taken apart for
inspection and lubrication.
To remove the weldments:
1. Remove the roll pin that holds the weldment on the
rod.
2. Remove the link to the transmission.
3. Remove the link to the parking brake locking arm.
4. Slide the weldment off.
Inspect spacers bearings and pivot points for wear.
Repair or replace all worn parts. Lubricate with a high
quality grease and reassemble.
1. Link
2. Brake Rod
3. Eccentric
4. Weldment
5. Flange Nut
6. Handle Bar
7. Control Arm
1
2
3
4
5
6
7
5
4
1
2
Model IZT 915055, 057, 059, 067, 501 with Serial Numbers Above 10,000
PE0840