Filter
Top Products
4 - 10
4.5 AXLE LOCKS
(915067, 055, 057, 059, 501) (Figure 5)
NOTE: The unit comes shipped with the front axle in
the lockout position.
If a pivoting front axle is needed: Remove axle lock
hardware from lockout position and install axle lock
hardware in pivoting position on both sides of front
axle.
NOTE: To lock front axle, install axle lock hardware in
the lockout position on both sides of the axle.
Figure 5
4.6 REMOVING MOWER DECK
Remove (Figure 6)
1. Remove PTO belt from electric clutch (see
Replacing PTO Belt).
NOTE: Perform steps 2 and 3 for the right and left
sides of unit.
2. Remove guide arm from front mount bracket.
3. Remove rear lift link, rear trunnion, front lift link,
and front trunnion from mower deck and mower lift.
4. Slide mower deck out from under unit.
Install (Figure 6)
1. Slide mower deck under unit.
NOTE: Perform steps 2 and 3 for the right and left
sides of unit.
2. Install rear lift link, rear trunnion, front lift link, and
front trunnion on mower deck and mower lift.
3. Install guide arm on front mount bracket.
4. Install PTO belt on electric clutch (see Replacing
PTO Belt)).
Figure 6
1
2
3
4
OE0240
1. Front Axle
2. Pivoting Position
3. Lockout Position
4. Axle Lock
Hardware
8
9
7
6
5
4
1
3
2
1. Mower Deck
2. Front Trunnion
3. Front Lift Link
4. Front Mount Bracket
5. Mower Lift
6. Guide Arm
7. PTO Belt
8. Rear Trunnion
9. Rear Lift Link
OE0230