Filter
Top Products
7 - 23
7.4 REPLACING HYDROSTATIC BELT
Remove (Figure 22)
Figure 22
1. Remove PTO belt (see Replacing PTO Belt).
2. Disconnect electric clutch connector.
3. Remove clutch stop.
4. Disconnect idler spring.
5. Remove hydrostatic belt from hydrostatic
transmission pulleys, pulley, electric clutch, and
idler.
Install (Figure 22)
1. Install hydrostatic belt on idler, electric clutch,
pulley, and hydrostatic transmission pulleys.
2. Connect idler spring.
3. Install clutch stop.
4. Connect electric clutch connector.
5. Install PTO belt (see Replacing PTO Belt).
CAUTION: Use care when releasing idler
spring tension. Keep body parts well away
from idler when performing this operation.
1
2
2
3
4
5
6
7
8
1. Hydrostatic Belt
2. Hydrostatic
Transmission Pulley
3. Electric Clutch
Connector
4. Pulley
5. Clutch Stop
6. Electric Clutch
7. Idler
8. Idler Spring
OE0320