Filter
Top Products
AQ-1 Power vent kit
Parts included:
Spillage Switch Kit
1. 185º F linear spillage switch mounted on an
angled bracket and equipped with 36 inch
cables connected to one eyelet terminal
and one 1/4" quick connect terminal
2. Spillage switch mounting screw
3. Push on male spade connector, replaces
eyelet terminal from 36 inch spill switch cable.
Vent Hood Kit
1. 4" vent hood: VH1-4
2. Plastic wall anchors (4)
3. Sheet metal screws (4)
4. 5" to 4" vent reducer pipe
5. AQ1FLAPPER back draft accessory
Vibration Mount Packet
1. Vibration mounts (2) with nuts and washers
2. Brackets (2) with nuts and washers
Gas Pressure Switch Packet
1. Gas pressure switch
2. Self-tapping mounting screws (4)
3. Manifold pressure tap fitting with 1/4" com-
pression nut and sleeve
4. 1/4" by 40" aluminum tubing (2)
Power Vent Kit
1. Power venter (HSUL-1 Series containing
integrated 24v control circuit) including 25
foot control cable with 1/4" quick connect
ends and an HPN 6 foot power cord
2. Nylon ties
1