Overview of this document
Release R.1.3 UK 11
gis
1.7 Overview of this
document
Table 1.2 provides an overview of the contents of this document.
Table 1.2 Contents of document
Chapter Target groups Description
2 Functioning of the
appliance
gis
This chapter describes how the appliance functions.
3 Installation
is
This chapter describes the installation activity to be completed
before you actually start up the appliance.
4 Filling and draining
gis
This chapter describes how to fill and drain the appliance.
5 The control panel
gis
This chapter describes the general control of the appliance
using the display.
6 Status of the appliance
gis
This chapter describes the status (mode or condition) that the
appliance may have, and possible actions to take.
7 Starting up and shutting
down
gis
This chapter describes how to start up the appliance, and how
to shut it down for a brief or long period of time. The general
heating cycle of the appliance is also described.
8 Main menu
gis
Describes the main menu of the display. This is the actual
menu for the user, however the installer and service and
maintenance engineers will also need to use this menu.
9 Service program
is
Describes the service menu. It is mainly intended for the
installer and service and maintenance engineers. End users
may also refer to this chapter for additional information about
the appliance.
10 Troubleshooting
gis
This chapter is mainly intended for the installer and the service
and maintenance engineer. It describes appliance errors.
These errors are indicated on the display. A troubleshooting
table of possible causes and solutions is provided. End users
may also refer to this chapter for additional information about
the appliance.
11 Maintenance frequency
gs
This chapter describes how to determine the optimum
frequency at which to carry out maintenance. Both the end
user and the service and maintenance engineer are
responsible for regular maintenance. They need to reach clear
agreement on this.
n Remark
If the appliance is not regularly maintained, the warranty
will become void.
12 Maintenance
s
This chapter sets out the maintenance tasks to be carried out
during a service.
13 Warranty (Certificate)
gis
This chapter states the warranty terms and conditions.